Van-Pack Drain Jetting Machine The world’s first all-electric high-performance jetting machine, offering all the features of the CityJet without any emissions.
Introducing the world's first zero-emission drain jetter
Operating range up to 350 mm
600 litres water tank
Electrical engine
from 750 kg
The performance of the eCityJet is in no way inferior to that of diesel-driven machines. The machine is ideally suited for unblocking pipes up to 350 mm. With fully charged batteries, and on an average working day you can operate the eCityJet for a full day without charging between jobs. However, most customers work for several days without recharging in between.
Zero emissions
The fully electric CityJet uses state-of-the-art technology and features a strong electric motor powered by an extremely efficient battery pack. This means the machine produces zero emissions, which makes the eCityJet ideally suited for use in city centres where strict emission requirements apply and in areas that are completely or partially enclosed. The eCityJet has all the features of a conventional diesel-driven machine and is only marginally heavier. The empty machine weighs approximately 750 kgs. The machine is comparable in size to the diesel-powered CityJet, making it suitable for most vans (such as a Mercedes Vito or Sprinter or a Ford Transit).
Clean & green solution
With the eCityJet you are ready for the future. In the coming years, there will be more and more emphasis on limiting NOx, particulate and CO2 emissions. The eCityJet already gives you a considerable advantage when it comes to customers who prefer to work in an environmentally-friendly way. An additional advantage is that the machine is also considerably quieter than one with a diesel engine, which is an important factor when working at night, for example. The machines are easy to maintain, which in the long run will certainly result in considerable savings. Making the switch now will allow you to stand out in the market.
I would say it’s very similar to using a diesel jetter, minus the noise. We’ve been doing four or five jobs a day for the past week and the machine is still about 46% charged. We haven't needed to recharge it as yet.
London-based Kwik Jet was the first UK contractor to put the eCityJet into daily operation at the start of 2022, using the machine to undertake commercial drainage tasks across London for some of the city’s most prestigious property management companies.
The company’s ambitious sustainability goals and regular work in the capital’s Low and Ultra-Low Emissions Zones have been major factors in their decision to invest in the new state-of-the-art equipment: “Our clients expect the best equipment and we’ve always invested in the latest technology for the business. We’ve worked with Rioned since the start and we’re excited to be the UK's first to operate the eCityJet.”
Michael MorrisManaging Director | Kwik Jet
Rechargeable battery pack
The eCityJet is powered by six rechargeable 5,7 kWh Li-ion batteries that can be charged using regular mains power from an ordinary wall socket. A typical charge takes approximately six hours to complete. On a single full charge, the machine can complete a full day of jetting without charging between jobs, with operators able to top up the charge during the day for longer flushing.
The award-winning eControl+ provides users with enhanced control over the jetting machine. System functions, including machine working hours, RPMs and service warnings, are displayed on the panel’s LCD screen, with a clear menu system navigated using a robust jog wheel. The 7-Channel RioMote remote is also available to facilitate safe, single-person operation.
The eCityJet includes a 135° pivoting hose reel and a range of standard features to enable immediate operation. The unit is supplied with two 300-litre water tanks, 80-metres of MaxFlow HP hose and 50 metres of NW 19 filling hose. Optional extras include the RioPulse pulsator system, 30-litre anti-freeze tank and the RioMeter hose counter.
Specifications & documentation
Default Specifications
Operating range
Max 350 mm
Motor/drive
24 kW electric engine
Battery pack
30 kWh battery package
BMS
With LCD display for monitoring individual batteries. Battery status and charge warning
HP pump Rioned/Speck
160 bar / 75 lpm | 2300 psi / 17 gpm
200 bar / 60 lpm | 3000 psi / 13 gpm
Pump protection
Run-dry protection with overrun possibility
Pressure regulation
Type Speck with automatic bypass
Water tank
600 litres (2 x 300 litres)
Filling reel
50 metres NW 19
Fixed hydrant connection
Connection with GK coupling for filling the tank. Hydrant connection possible.
HP hose
80 metres NW 13 or NW 16
HP reel
180° swivelling, electrically driven and with RioFree freewheel
Control
Rioned eControl+
Weight
From 750 kgs
Dimensions (lxwxh)
1.615 x 1.240 x 1.195 mm
Nozzles
2 x 1/2" (1 open, 1 blind)
Standard accessories
Spray gun with lance
Colour
Blue cover, black metal frame
Optional specifications
Remote control
RioMote 9-Channel remote control system
RioPulse Pulsator
Pump adjustment to send the water through the hose in pulses
Anti-freeze tank
30 litre anti-freeze tank with circulation system to protect the high-pressure pump
Extra HP hose length
100, 120 or 140 metres NW 13 or NW 16
Fixed suction venturi
Suction device for filling the tanks with tanks with surface water
Electric water level control
Automatic sysytem to open and close the filling line of your machine if the water has reached its minimum or maximum level in the tank
Second HP reel
Second HP reel instead of filling reel
Radiographic control HP reel
Coiling on and off via the radio remote control
RioMeter hose counter
RioMeter hose counter for displaying metres of hose in the pipe
